Canon PIXMA TS3320 Online Manual Download Page 337

Page: 337 / 396

Refer to the instruction manual supplied with the paper for detailed information on the printable side.

Check5

Is the FINE cartridge installed properly?

If the FINE cartridge is not installed securely, ink may not be ejected correctly.

Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.

Then install the FINE cartridges again. Push up the FINE cartridge until it clicks into place.

After confirming that the FINE cartridge is installed properly, close the cover.

•

When copying, see also the sections below:

Check6

Is platen glass dirty?

Clean the platen glass.

Cleaning Platen and Document Cover

Check7

Make sure original is properly loaded on platen.

When you load the original on the platen, load it with the side to be copied facing down.

Loading Originals

Check8

Did you copy a printout done by this printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Reprint from the computer if you can reprint from it.

337

Summary of Contents for PIXMA TS3320













































































































































































































































































































































































































Search results

Summary of Contents for PIXMA TS3320

Reviews:

Brands by name

Popular brands

Canon PIXMA TS3320, Online Manual

Search results

Summary of Contents for PIXMA TS3320

Reviews:

Brands by name

Popular brands