background image

Editing the Scenes 

64

IMPORTANT

 

Be careful when deleting original recordings. 

Once deleted, an original scene cannot be 
recovered.

 

Do not change the position of the power 

switch or the 

/

 switch while the scene is 

being deleted.

NOTES

 

Scenes cannot be deleted when the disc is 

protected (

65).

 

You may not be able to delete scenes shorter 

than 5 seconds.

Deleting a Single Scene

POINTS TO CHECK

Disc type: 

 DVD-RW initialized in VR 

mode.

From the original index screen, select 
(

) the scene to delete. To delete 

a scene only in the playlist, press 

 first, and then select the scene.

Deleting a Scene Just After Recording

POINTS TO CHECK

Disc type: 

 DVD-RW discs (VIDEO or 

VR mode).

1

Immediately after recording a 
scene, press 

(record review).

2

While reviewing the scene, select 
(

 and press (

).

3

Select (

) [YES] and press (

).

NOTES

You will not be able to delete the last scene if 
after the scene was recorded you changed the 
operating mode, turned off the camcorder or 
removed the disc.

Deleting All Scenes

POINTS TO CHECK

Disc type: 

 DVD-RW initialized in VR 

mode.

To delete all the scenes from the original 
index screen follow the procedure below. 
This will delete also the whole playlist. If 
you only want to delete all the scenes 
from the playlist (without affecting the 
original recordings), press 

 first 

and then continue as follows.

* When you are deleting the playlist, this menu 

option will be replaced by [PLAYLST ALL 
DEL].

(

13)

FUNC.

(

27)

 DELETE

YES

(

13)

PLAYLIST

FUNC.

(

13)

MENU

(

27)

 DISC OPERATIONS

MOVIES ALL DEL*

YES

 button

PLAYLIST

MENU

MENU

D115_NTSC-E.book  Page 64  Friday, June 9, 2006  5:29 PM

Summary of Contents for PICTBRIDGE DC22


















































































































Reviews: