Canon Perfect Binder-F1 User Manual Download

Page: 63 / 74

Alarm List

3-20

rou

ble

oot

ing

Alarm List

This section explains the alarm that can occur with this product.

Alarm will indicated on the printer display. See the manual that comes with the
printer for information about alarm message or required action.

Alarm Timing

Required Action

Paper remaining in the
gathering tray

Remove the paper from the gathering tray. (



P. 3-2)

Glue running low

Replenish the glue. (



P. 2-17)

Out of glue

Replenish the glue. (



P. 2-17)

Trimmer waste unit almost full

Remove cuttings from the Trimmer waste tray.
(



P. 2-14)

Trimmer waste unit is full

Remove cuttings from the Trimmer waste tray.
(



P. 2-14)

Blade nearing its replacement
limit

Replace the blade. Contact your local authorized Canon
dealer.

Blade receptor nearing its
replacement limit

Replace the blade receptor. Contact your local
authorized Canon dealer.

Blade reaching its replacement
limit

Replace the blade. Contact your local authorized Canon
dealer.

Blade receptor reaching its
replacement limit

Replace the blade receptor. Contact your local
authorized Canon dealer.

Defective booklets

Remove the paper stack of the defective booklets from
the stacker. (



P. 2-11)

Stacker nearly full

Remove the finished booklets from the stacker.
(



P. 2-11)

Stacker is full

Remove the finished booklets from the stacker.
(



P. 2-11)

Summary of Contents for Perfect Binder-F1











































































Search results

Summary of Contents for Perfect Binder-F1

Reviews:

Related manuals for Perfect Binder-F1

Brands by name

Popular brands

Canon Perfect Binder-F1, User Manual

Search results

Summary of Contents for Perfect Binder-F1

Reviews:

Related manuals for Perfect Binder-F1

Brands by name

Popular brands