![background image](http://html.mh-extra.com/html/canon/np6412/np6412_service-manual_62358279.webp)
CHAPTER 9 INSTALLATION
COPYRIGHT © 1999 CANON INC. CANON NP6512/6612/7120/7130/7130F REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-21
Work
Checks and remarks
Step
III. MOVING THE MACHINE
If you need to move the machine by truck or any other means of transportation after installa-
tion, be sure to perform the following:
Turn on the power, and press the Default Ra-
tio key to select 70%.
1
Press the Paper Select key to select the manual
feed tray; then, press the Copy Start key with-
out placing any paper on the manual feed tray.
2
The count/ratio indicator will indicate ' '.
Turn off the power switch, and disconnect the
power plug from the outlet.
3
Pull the open/close lever found on the left of
the machine, and open the machine’s top unit.
4
Take out the shipping attachments [1] and [2]
stored in the machine's bottom unit.
5
[1]
[2]
Detach the copy tray.
6
Press down on the
marking on the
machine's top unit to fully close the machine.
7
Caution:
Before starting the following work, check to make sure that the machine is not too hot. If it is,
as immediately after continuous copying, you may not be able to carry out step 8, in which the
shipping attachment is replaced.
Summary of Contents for NP6412
