Canon NP6412, Service Manual

Page: 501 / 599

CHAPTER 5 SELF DIAGNOSIS
5-3
Caution:
1. If the self-diagnosis has turned on, turn off the power switch to reset the machine.
In the case of 'E000', 'E001', 'E002', or 'E003', however, the machine must be reset as
follows: this consideration is to prevent feeding power to the fixing heater otherwise oc-
curring if the thermistor has an open circuit:
2. In the case of 'E000', 'E001', 'E002', 'E003', or 'E220', the machine will turn off in 1.5 sec
for 'E000' through 'E003' and in 2 sec for 'E220'.
3. In the case of 'E000', 'E001', 'E002', or 'E003', perform the following steps:
1) Turn off the power switch, and short circuit JP103 and JP104 on the DC controller PCB
with a screwdriver or the like.
• The count/ratio indicator on the control panel turns on 'F'.
Figure 5-1
2) When 'F' has turned on, stop shorting circuit JP103 and JP104.
3) Turn off and then on the machine.
SERVICE
JP104
JP104 JP103