manualshive.com logo in svg

Canon N 1000, User Manual, Page: 86 / 126

Share
Download
Canon N 1000 User Manual Download Page 86

Troubleshooting

4

6-4

Cannot install Windows printer driver.

Problem 1:

Incorrect installer CD-ROM mounted.

Solution:

Mount the installer CD-ROM provided with the printer.

Problem 2:

Installer CD-ROM is damaged.

Solution:

Call for service and request a new installer CD-ROM. You can also 
download the driver from the Canon Home Pages 
(http://www.canon.com/).

Problem 3:

Windows operating system is unstable.

Solution:

If Windows displays a system error message such as “General Protection 
Fault” or “Illegal Operation, the computer system has become unstable. 
Confirm the problem with the system and try to install again.

Problem 4:

Installation does not complete successfully.

Solution:

Open the Printer folder, remove the N1000/N2000 printer icon, then try 
again. (

Æ

Setup Guide)

System does not recognize the printer.

Problem 1:

Interface cable is disconnected.

Solution:

If the printer is connected via the parallel or USB port, check the cable 
connections at the printer and the computer. (

Æ

Setup Guide, Chapter 1, “4 

Connect the Power Cord”).

Problem 2:

The parallel port or USB port is not set.

Solution:

If the printer is connected via the parallel or USB port, the correct port 
must be selected on the printer operation panel before you can use the 
printer. (

Æ

Setup Guide, Chapter 1, “9 Select the Interface”)

Problem 3:

Network information for the printer has not be set.

Solution:

If the printer is connected to a network, perform the network settings with 
NetSpot or the Remote UI. (

Æ

Network Guide)

00_J80xUG_Eng.book  Page 4  Friday, April 12, 2002  12:28 AM

Summary of Contents for N 1000































































































































Reviews:

No comments