manualshive.com logo in svg

Canon N 1000, User Manual, Page: 25 / 126

Share
Download
Canon N 1000 User Manual Download Page 25

Print Media That Can Be Used

3

2-3

Important

Important

z

Never touch the printed surface of a printed transparency until it has dried for at 
least 15 minutes, and never stack printed transparencies.

z

Remove each sheet from the output tray as it is ejected from the printer. To prevent 
smearing, never allow printed transparencies to stack on the output tray.

z

Color Bubble Jet Transparencies (CF-102) should not be printed at high speed. 
Printing at high speed could cause double-feeding and jamming.

z

Using transparencies of another manufacturer could cause them to jam.

„

„

„

„

Quick Dry Transparencies

Highly transparent film that dries quickly. Ideal for large volume print 
jobs with transparencies.

Canon product:
Color Bubble Jet Transparencies Quick Drying Type (CF-401)

z

You must always print on the correct print side (the rough side) of this film, and 
load the edge of each sheet marked with the white tape into the printer first.

z

To prevent a jam, do not remove the white tape from the sheet before printing. The 
tape can be removed after printing.

00_J80xUG_Eng.book  Page 3  Friday, April 12, 2002  12:28 AM

Summary of Contents for N 1000































































































































Reviews:

No comments