Canon MX883, Service Manual, Page: 58 / 80

Platen
(Clear Ink
Counter) Platen ink absorber counter
resetting Not used.
8 EEPROM Save EEPROM information
saving The EEPROM information (same as the one in EEPROM
information print) is displayed on the PC or is saved to
the PC as a text file. This function is not available in most
cases of errors.
9 Panel Check Button and LCD test See " (4) Button and LCD test " below.
10 Set Destination Destination settings Select the destination, and click Set .
ASA, AUS, BRA, CHN, CND, EMB, EUR, JPN, KOR,
LTN, TWN, USA
11 Ink Absorber
Counter
Ink absorber counter setting See " (5) Ink absorber counter setting " below.
12 Print (CD-R
Correction)
Printing of the pattern for
disc label print position
correction Not used.
13 CD-R Correction Disc label print position
correction (X and Y
direction)
Not used.
14 Print (LF/ EJECT
Correction)
LF / Eject correction
pattern print Perform LF / Eject correction only when streaks or
uneven printing occurs after the repair. See "
(3) LF / Eject
correction " below.
15 LF/ EJECT
Correction
LF / Eject correction value
settings Set the correction value based on the printed pattern (14.
LF/EJECT correction pattern print). See "
(3) LF / Eject
correction " below.
16 Auto LF/EJ (1) Automatic LF / Eject
correction Not used.
17 Auto LF/EJ (2) Automatic LF / Eject
correction Not used.
18 Left Margin
Correction
Left margin pattern print
and correction Not used.
19 Set Time Time setting Not used.
20 PTT Parameter
Mode In
Entry in the PTT parameter
mode Entry in the PTT parameter mode is allowed when this
button is clicked.
21 Ink Sensor Pressure sensor correction Not used.
22 Head Temp
Sensor
Print head diode sensor
correction Not used.
23 Wetting Liquid
Counter
Wetting liquid counter
setting Not used.
24 Panel Rank Capacitive sensor
sensitivity setting Not used.
25 Flatbed Scanner Individual scanner
adjustment
Not used.
54 / 76