Canon MVX4 Instruction Manual Download Page 87

Page: 87 / 147

Advanced Functions

git

al Camera Functions

Selecting the Drive Mode

1. Set the camcorder to

CAMERA•

mode.

2. Set the mode dial to a mode other than

3. Press the DRIVE MODE button to switch between the drive modes.

The setting changes with each press of the button.

4. Press the PHOTO button halfway.
5. Continuous Shooting/High-Speed Continuous Shooting: Press and

hold the PHOTO button fully.

A series of still images will be recorded as long as you hold the PHOTO button.

Auto Exposure Bracketing: Press the PHOTO button fully.

Three still images in different exposures are recorded to the memory card.

(Single)

Records a single still image when you press the PHOTO
button.

(Continuous Shooting)

Captures a quick series of still images while you press the
PHOTO button. For the number of frames per second,
refer to the table on the next page.

(High-Speed Continuous

Shooting)

(AEB (Auto Exposure

Bracketing))

The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps), allowing
you to choose the perfect exposed shot.

PHOTO button

DRIVE MODE button

Mode dial

MVX4i_P-E.book Page 87 Tuesday, June 7, 2005 7:50 PM

Summary of Contents for MVX4




















































































































































Search results

Summary of Contents for MVX4

Reviews:

Related manuals for MVX4

Brands by name

Popular brands

Canon MVX4, Instruction Manual

Search results

Summary of Contents for MVX4

Reviews:

Related manuals for MVX4

Brands by name

Popular brands