Canon MVX4 Instruction Manual Download Page 75

Page: 75 / 147

Advanced Functions

Playback

Playback

Magnifying the Image

The playback image can be magnified up to 5 times.

1. Set the camcorder to

PLAY(VCR)•

mode.

2. Move the zoom lever toward

• The image is magnified by 2 times.
• A frame appears indicating the position of the magnified area.
• To further enlarge the image, move the zoom lever toward

. To shrink the image

below 2 times magnification, move the zoom lever toward

• A “

” will display for images that cannot be enlarged.

3. Select the magnified area with the SET dial.

Turn the SET dial to move the image to the right and left, or up and down. Pressing
the SET dial switches between the directions.

4. To return to the original image size, move the zoom lever toward

until the magnification frame disappears.

Movies played back from a memory card cannot be magnified.

Zoom lever

SET dial

MVX4i_P-E.book Page 75 Tuesday, June 7, 2005 7:50 PM

Summary of Contents for MVX4




















































































































































Search results

Summary of Contents for MVX4

Reviews:

Related manuals for MVX4

Brands by name

Popular brands

Canon MVX4, Instruction Manual

Search results

Summary of Contents for MVX4

Reviews:

Related manuals for MVX4

Brands by name

Popular brands