103
E
Editing
For normal use, set [AV
DV/
] to [OFF]. If it is set to [ON], digital signals
cannot be input via the camcorder’s DV terminal.
We recommend powering the camcorder from a household power source.
Connecting the camcorder to the computer you can also use the analog-digital
conversion to transfer analog recordings to your computer as digital signals.
Analog-digital conversion can be performed also when connecting the
camcorder to the computer using the USB cable.
The required equipment and operation is the same as when Transferring Video
Recordings to a Computer (
119), except for step 3: In this case set the
[AV
DV/
] to [ON]. Check the setting before connecting the camcorder to
the computer.
The analog-digital conversion may not operate properly depending on the
software and the specifications and settings of your computer.
MVX4i_P-E.book Page 103 Tuesday, June 7, 2005 7:50 PM
