manualshive.com logo in svg

Canon MultiPASS C70, User Manual, Page: 86 / 421

Share
Download
Canon MultiPASS C70 User Manual Download Page 86

3-4

Registering Information in the MultiPASS C70

Chapter 3

Using the One-Touch Speed Dialling/Special Function
Buttons

The buttons located on the right of the operation panel have two
functions:

One-Touch Speed Dialling Buttons

The buttons marked 01 to 12 can be used to dial fax/telephone numbers
registered under these buttons. For details, refer to page 6-2. To use the
one-touch speed dialling buttons, the 

Function

button’s light must be

off.

Special Function Buttons

To access the special functions (marked under or to the sides of the
buttons), press the 

Function

button to turn on its light and then press

the button you wish to access.

Resume

01

02

03

04

05

06

07

08

09

10

11

12

Function

Memory Reference

Data Registration

R

Space

Tone/+

Cleaning

Set

Clear

Report

D.T.

Summary of Contents for MultiPASS C70






































































































































































































































































































































































































































Reviews:

No comments