manualshive.com logo in svg

Canon MultiPASS C70, User Manual, Page: 137 / 421

Share
Download
Canon MultiPASS C70 User Manual Download Page 137

Chapter 5

Paper Handling

5-23

P

aper Handling

2. Remove the covers from the two pieces of tape on the cleaning sheet.

3. With the sticky side out (towards you) and down (going into the

multi-purpose tray), insert the sheet into the multi-purpose tray
until it stops, so that the right edge of the sheet is aligned with the
right side of the multi-purpose tray. Then slide the paper guide
snugly against the left edge of the cleaning sheet.

4. Press 

Function

.

5. Press 

Cleaning

.

6. Use 

d

or 

u

to select 

ROLLER CLEANING

.

ROLLER CLEANING

02

08

NOZZLE CHECK

10

Cleaning

Function

Summary of Contents for MultiPASS C70






































































































































































































































































































































































































































Reviews:

No comments