manualshive.com logo in svg

Canon MP-C545, User Manual, Page: 40 / 222

Share
Download
Canon MP-C545 User Manual Download Page 40

Chapter 2

Paper Handling

2-5

P

aper Handling

Transparencies

Canon Transparencies are recommended. These transparencies produce excellent 
contrast, sharpness, and color to produce crisp and professional overhead 
presentations. Do not use normal transparencies in the MultiPASS, as they do not 
absorb ink and may cause ink to run.

High Gloss Film

The Canon High Gloss Film features a bright white finish that lends striking visual 
power to charts, graphs, and photographic images. It creates a sharper and more 
vivid color output than is possible with coated paper. Use of this film gives your 
presentation materials and graphics a professional look. This film provides the best 
color print quality for the BC-21e Color BJ Cartridge and is recommended when 
printing at 720 

×

 360 dpi.

Assorted Paper Starter Kit

If you would like to try some of the papers described above, look for Canon’s 
Starter Kit. It contains an assortment of five paper types.

Summary of Contents for MP-C545































































































































































































































Reviews:

No comments