manualshive.com logo in svg

Canon MP-C545, User Manual, Page: 143 / 222

Share
Download
Canon MP-C545 User Manual Download Page 143

6-24

Maintenance

Chapter 6

4.

Press the cartridge button 

.

❑

The cartridge holder moves to the center of the unit. 

The color BJ tank is on the left, and the black BJ tank is on the right.

●

Do not try to manually move or stop the cartridge holder as this may 
damage the MultiPASS.

●

The MultiPASS includes an automatic protection feature that helps keep it 
from overheating. If the cartridge holder does not move, unplug the 
MultiPASS and let it cool for several minutes. When it has cooled, plug it in 
again, and press the  

  button to move the cartridge holder.

c

Ink

Cartridge

BCl-21

Color

Made  in

Japan

Ink

Cartridge

BCl-21

Black

Made  in

Japan

Color BJ
Cartridge

BC-21e

Made in Japan

Color Slot

Black Slot

BCI–21 COLOR
BJ TANK

BCI–21 BLACK
BJ TANK

Summary of Contents for MP-C545































































































































































































































Reviews:

No comments