Home
/
Canon
/
MP-C545
/
User Manual

Canon MP-C545, User Manual, Page: 131 / 222

Share

Page: 131 / 222

Canon MP-C545 User Manual Download Page 131

6-12

Maintenance

Chapter 6

Using Ink

Canon has more engineers dedicated to creating quality ink for providing the best
results for output on Bubble Jet printers than any other organization. Canon does
not prohibit the use of third-party inks and the use of third-party inks does not
invalidate the product’s limited warranty. However, Canon cannot guarantee the
quality or performance of your unit when you are using inks from other suppliers.

Canon’s limited warranty does not cover damage caused to Canon’s Bubble Jet
products that is attributable to the use of third party parts or supplies, including
inks. The limited warranty remains in effect for its life once that particular damage
has been properly repaired.

●

For optimum printing results, Canon recommends that you use the Canon
BC-21e Color BJ Cartridge or the optional Canon BC-20 Black with your
MultiPASS.

●

When replacing BJ tanks in the BC-21e Color BJ Cartridge, Canon
recommends that you use the Canon BCI-21 Color and BCI-21 Black BJ
Tanks.

n

«
...
129
130
131
132
133
...
»

Summary of Contents for MP-C545































































































































































































































Reviews:

No comments