![background image](http://html.mh-extra.com/html/canon/microfilm-scanner-800ii/microfilm-scanner-800ii_instructions-manual_63041022.webp)
– 20 –
Before You Begin...
Connecting Via SCSI
When connecting the scanner to a computer using a SCSI
card, use the following SCSI cards and cables.
●
SCSI card
Use one of the following recommended SCSI cards:
Adaptec SCSI card (for PCI bus)
• AHA-2930U
• AHA-2940AU
• ASC-19160
• ASC-29160
When installing a SCSI card on your computer, follow the
directions in both the manual for the SCSI card and the
computer.
●
SCSI cable
• The SCSI connector on the scanner is a half-pitch 50-
pin connector (pin-type). No SCSI cable is supplied
with the scanner. To connect the scanner to a computer,
obtain a SCSI cable with the correct connectors for the
scanner and the SCSI card installed in the computer.
• The maximum length of SCSI cables are defined by the
SCSI standard. For details, see the user manual for your
SCSI card.
IMPORTANT
• Only one SCSI port can be used on the scanner and
terminator setting is fixed to ON.
You cannot daisy chain multiple MS800II scanners.
• The SCSI ID for the scanner can be set from ID0 to
ID5. By default, the SCSI ID for the scanner is set
to SCSI ID=2. When changing the SCSI ID setting,
make sure to contact an authorized Canon dealer
or service professional.
• When daisy chaining the scanner with the other
SCSI devices, note the following:
• Change the ID of the other SCSI devices so they
do not to overlap.
• Make sure that the scanner is at the end of the
chain and the terminate setting of the other
devices is OFF.
CE-IE-323-01
07.5.14, 11:06
Page 20
Adobe PageMaker 6.5J/PPC