Canon MG6110, Service Manual

Page: 49 / 70

3-3. Adjustment and Settings in Service Mode
(1) Service mode operation procedures
Use the Service Tool on the connected computer.
1) Start the machine in the service mode.
i. With the machine power turned off, press and hold the ON button. (DO NOT release the button.)
ii. When the Power LED lights, while holding the ON button, press the Stop button 5 times, and release the
ON button. (Each time the Stop button is pressed, the Alarm and Power LEDs light alternately.)
iii. When the Power LED lights, the machine is ready for the service mode operation.
2) Start the Service Tool on the connected computer.
i. When a button is clicked in the Service Tool dialog box, that function is performed. During operation of the
selected function, all the Service Tool buttons are dimmed and inactive.
ii. When the operation is completed, "A function was finished." is displayed, and another function can be
selected.
iii. If a non-supported function is selected, "Error!" is displayed. Click
OK
in the error message dialog box to
exit the error.
the cassette)
45 / 66