5) Remove the timing slit film. Be cautious to keep it free from any grease or damage.
6) Pass the head of a flat-blade screwdriver through the hole of the main chassis, and press the
carriage belt to release it from the pulley. Be cautious to keep it free from any grease.
7) Disconnect the carriage FFC from the logic board connector, then remove the carriage cable
cover, carriage cable holder, and FFC core.
26 / 66
Summary of Contents for MG6110
