Canon MF419x User Manual Download Page 759

Page: 759 / 917

#751

The FTP server has not been started up or a network connection has been cut.

(Failure to connect to the destination is sometimes caused by a disconnection en route.)

●

Check the destination.

●

Check the network status.

Viewing Network Settings(P. 445)

The IP address was not set correctly.

●

Check <TCP/IP Settings>.

Setting IP Addresses(P. 436)

#752

E-mail sending or I-Fax sending/receiving was impossible because an incorrect SMTP server name was

set.

●

Check the SMTP server name, and correct the setting.

Configuring Basic E-Mail Settings(P. 464)
Configuring E-Mail/I-Fax Communication Settings(P. 469)

E-mail sending or I-Fax sending/receiving was impossible because an incorrect domain name was set.

●

Check the domain name, and correct the setting.

Configuring DNS(P. 488)

E-mail sending or I-Fax sending/receiving was impossible because the machine was not connected to a

network correctly.

●

Check whether the machine is properly installed and correctly connected to the network.

Installation/Settings Problems(P. 758)

#753

Scanned data could not be sent as e-mail, not sent/received as I-Fax, or not stored in the shared

folder/FTP server because the LAN cable is disconnected.

●

Check whether the LAN cable is connected correctly.

Connecting to a Wired LAN(P. 418)

#755

Scanned data could not be sent as e-mail or I-Fax nor stored in the shared folder or FTP server because

TCP/IP was not working correctly.

●

Check <TCP/IP Settings>, and set correctly.

Network Settings(P. 630)

An IP address is not set.

●

Set the IP address correctly.

Troubleshooting

750

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MF419x

Reviews:

Canon MF419x, User Manual, Page: 759 / 917

Search results

Summary of Contents for MF419x

Reviews: