manualshive.com logo in svg

Canon MF419x, User Manual, Page: 433 / 917

Share
Download
Canon MF419x User Manual Download Page 433

From a Computer

8

Register the generated PIN code to the wireless router.

●

Register the PIN code on the setup screen displayed in step 1.

●

The PIN code must be registered within 10 minutes after tapping <Yes> in step 7.

If an error message is displayed during setup

●

Tap <Close> and return to step 6.

From the Operation Panel

9

Check that the Wi-Fi indicator is blinking on the operation panel.

●

The Wi-Fi indicator blinks when a wireless router is detected.

➠

When the setup is completed, the screen below is displayed, and approximately 2 seconds later, the Wi-Fi
indicator lights up. Wait approximately 2 minutes (until the automatic settings of IP address and other
items are complete).

Signal strength

●

When more than one wireless router is available for connection, the machine connects to the device with
the strongest signal. Signal strength is measured using RSSI (Received Signal Strength Indication).

●

You can set the IP address manually.  Setting IP Addresses(P. 436)

Network

424

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments