manualshive.com logo in svg

Canon MF419x, User Manual, Page: 414 / 917

Share
Download
Canon MF419x User Manual Download Page 414

If AirPrint Cannot Be Used

0UWX-0HR

If AirPrint cannot be used, try taking the following solutions.

●

Make sure that the machine is turned ON. If the machine is turned ON, first turn it OFF, then wait for at least 10
seconds and then turn it back ON to check if the problem is solved.

●

Make sure that no error messages are displayed on the machine.

●

Make sure that Apple devices and the machine are connected to the same LAN. If the machine is turned ON, it may
take several minutes before the machine is ready for communication.

●

Make sure that Bonjour on your Apple device is enabled.

●

Make  sure  that  the  machine  is  configured  to  enable  printing/scanning/faxing  from  a  computer  even  when  no
department  ID  and  password  are  entered.  Setting  the  Department  ID  Management  for  Printing  or  Faxing
from the Computer(P. 530)

●

For  printing,  make  sure  that  the  paper  is  loaded  in  the  machine  and  the  machine  has  sufficient  toner  cartridge
remaining.  Displaying the Screen for AirPrint(P. 396)

●

For  scanning,  make  sure  that  the  machine's  setting  for  Network  Link  Scan  is  <On>.  Changing  the  Setting  of
Functions Available with AirPrint(P. 395)

Can Be Used Conveniently with a Mobile Device

405

Summary of Contents for MF419x






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments