manualshive.com logo in svg

Canon MAXIFY GX2000 Series, Online Manual, Page: 645 / 693

Share
Download
Canon MAXIFY GX2000 Series Online Manual Download Page 645

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)

The printer may have been unplugged while it was on.

Check the error message displayed on the computer and click 

OK

.

The printer starts printing.

Refer to 

Turning the Printer On and Off

 for the correct way to turn the power off.

Writing Error/Output Error/Communication Error (Windows)

Check 1

 If the printer is not turn on, make sure it is connected to the power supply and

turn it on.

Check 2

 Make sure printer is properly connected to computer.

If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:

• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.

• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer over a LAN, make sure the printer is correctly set up for network use.

Check 3

 Make sure MP Drivers are installed correctly.

Refer to 

Updating the Driver

 to uninstall unnecessary drivers and install the latest drivers.

Check 4

 When printer is connected to your computer with a USB cable, check device

status from your computer.

Follow the procedure below to check the device status.

1. Select 

Control Panel

 > 

Hardware and Sound

 > 

Device Manager

.

1.

Note

• If the 

User Account Control

 screen is displayed, select 

Yes

.

2. Open 

USB Printing Support Properties

.

2.

Double-click 

Universal Serial Bus controllers

 and 

USB Printing Support

.

Note

• If the 

USB Printing Support Properties

 screen is not displayed, make sure the printer is

•

correctly connected to the computer.

Check 2

 Make sure printer is properly connected to computer.

3. Click 

General

 tab and check for a device problem.

3.

645

Summary of Contents for MAXIFY GX2000 Series






















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments