Canon MAXIFY GX2000 Series, Online Manual, Page: 291 / 693

To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left
when orientation is [Landscape] check box.
Rotate 180 degrees
Prints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will
be reversed vertically and horizontally.
Page Layout
Selects the size of the document you want to print and the type of printing.
1 on 1 to 16 on 1
Multiple pages of document can be printed on one sheet of paper. To change the page order, click
Preferences... . In the Page Layout Printing dialog box that appears, specify Page Order .
Poster (1 x 2) to Poster (4 x 4)
This function enables you to enlarge the image data and divide the enlarged data into several
pages to be printed.
You can also glue together these sheets of paper to create large printed matter, such as a poster.
Preferences...
Opens the Poster Printing dialog box .
Click this button to set details on poster printing.
Zoom
Specifies an enlargement or reduction ratio for the document you want to print.
1-sided/2-sided/Booklet Printing
1-sided Printing
Select when performing single-sided printing.
2-sided Printing
Select when performing duplex printing.
Automatic
Selects whether duplex printing is to be performed automatically or manually.
To perform duplex printing manually, uncheck this check box.
Booklet Printing
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of
the paper. This type of printing ensures that pages can be collated properly, in page number order,
when the printed sheets are folded and stapled at the center.
Automatic
Selects whether duplex printing is to be performed automatically or manually.
To perform duplex printing manually, uncheck this check box.
Preferences...
Opens the Booklet Printing dialog box . Click this button to set details on booklet printing.
Binding Location
Selects the stapling margin position.
The printer analyzes the
Orientation and Page Layout settings, and automatically selects the best
stapling margin position. Check Binding Location , and select from the list to change it. To specify the
width of the binding margin, set it from the Page Setup tab.
Specify Margin...
Opens the Specify Margin dialog box . You can specify the width of the margin.
291