LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications
42
8.10.15 CF_PTIMEMODE Command
Command “CF_PTIMEMODE_%1”[CR]
%1
“COUNTUP” ---------------- Select Count up
“COUNTDN” ---------------- Select Countdown
Details
Set operation mode of P-timer.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.16 CF_PTIMER Command
Command “CF_PTOMER_%1”[CR]
%1
“START” ----------------------- Execute P-timer
“STOP” ------------------------ Pause P-timer
“RESTART” ------------------ Restart P-timer
“RST” -------------------------- Reset P-timer
“EXIT” -------------------------- Terminate P-timer function
Details
Control P-timer.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.17 CF_PTIME Command
Command “CF_PTIME_%1”[CR]
%1
“001” ~ “180” -----------Directly specify the timer by minutes.
Details
Set Countdown timer for P-timer function.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
8.10.18 CF_CCAPTIONDISP Command
Command “CF_CCAPTIONDISP_%1”[CR]
%1
“OFF” ------------- Select Off
“CC1” ------------- Select CC1
“CC2” ------------- Select CC2
“CC3” ------------- Select CC3
“CC4” ------------- Select CC4
Details
Select channel of Closed caption.
The status set with this command is stored in EEPROM and its setting is effective
even after ALL is OFF.
This command is available in normal Power ON status.
Closed caption is available under conditions below;
Entered signal is appropriate (Video, NTSC signal of S-video) and System is fixed
to NTSC.
Response
Acceptable “000”[CR]
Unacceptable “Error
Code”[CR]
