Canon LEGRIA HF R206 Instruction Manual Download

Page: 51 / 179

Video

During playback pause:

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or

flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.

• You may not be able to play back with this camcorder movies recorded

on a memory card using another device.

NOTES

• Depending on the recording conditions, you may notice brief stops in

video or sound playback between scenes.

• During fast/slow playback, you may notice some anomalies (blocky

video artifacts, banding, etc.) in the playback picture.

• The speed indicated on the screen is approximate.

Resume playback.

Slow playback backward*.

Slow playback forward*.

Decorate scenes (

92).

* Touch repeatedly to increase the playback speed 1/8

→

1/4 the

normal speed. During slow playback, touch anywhere on the
screen to return to playback pause.

Summary of Contents for LEGRIA HF R206




















































































































































































Search results

Summary of Contents for LEGRIA HF R206

Reviews:

Related manuals for LEGRIA HF R206

Brands by name

Popular brands

Canon LEGRIA HF R206, Instruction Manual

Search results

Summary of Contents for LEGRIA HF R206

Reviews:

Related manuals for LEGRIA HF R206

Brands by name

Popular brands