Canon LEGRIA HF R206 Instruction Manual Download

Page: 41 / 179

Smart AUTO Mode

To record video

3 Press

to begin recording.

Press

again to pause the recording.

To take photos

3 Press

halfway.

If the subject is not in focus,

will flash in yellow. Adjust the

camcorder's position and press

halfway again. Once the focus

is automatically adjusted,

will turn green and one or more AF frames

will appear.

4 Press

fully.

The ACCESS indicator will flash as the photo is being recorded.

When you have finished recording

1 Make sure that the ACCESS indicator is off.

2 Turn off the camcorder.

3 Close the LCD panel.

About the Smart AUTO mode

• Only the following functions are available in this mode.

- Zoom (

44).

- Quick Start (

46).

- Video snapshot (

66).

- Image stabilization modes (

62).

- Face detection (

64) to get beautiful shots of people every time,

tracking the subject even if the person moves.

- Touch & Track (

65) to track other moving subjects, keeping

them in focus and using the best settings to record them.

- Decorating scenes (

92).

Summary of Contents for LEGRIA HF R206




















































































































































































Search results

Summary of Contents for LEGRIA HF R206

Reviews:

Related manuals for LEGRIA HF R206

Brands by name

Popular brands

Canon LEGRIA HF R206, Instruction Manual

Search results

Summary of Contents for LEGRIA HF R206

Reviews:

Related manuals for LEGRIA HF R206

Brands by name

Popular brands