Additional Information
147
Trouble?
Troubleshooting
If you have a problem with your camcorder, refer to this section. Some-
times what you think is a malfunction of the camcorder may have the
simplest of solutions - please read the “CHECK THIS FIRST” box
before going on to the more detailed problems and solutions. Consult
your dealer or a Canon Service Center if the problem persists.
CHECK THIS FIRST
Power source
The camcorder will not turn on or it turns off by itself.
- The battery pack is exhausted. Replace or charge the battery pack.
- Remove the battery pack and reattach it correctly.
Cannot charge the battery pack.
- Make sure the camcorder is off so charging can start.
- The temperature of the battery pack is outside the charging range. If the battery pack’s tem-
perature is below approximately 0 °C, warm it before charging it; if it is above approximately
40 °C, let the battery pack cool down before charging it.
- Charge the battery pack in temperatures between 0 °C and 40 °C.
- The battery pack is faulty. Replace the battery pack.
- The camcorder cannot communicate with the battery pack attached. Such battery packs can-
not be charged using this camcorder.
- This can occur when attaching and attempting to charge a battery pack that is not recom-
mended by Canon.
- When using a battery pack recommended by Canon, there may be a problem with the battery
pack or camcorder. Consult a Canon Service Center.
Power supply
• Is the battery charged? Is the compact power adapter correctly con-
nected to the camcorder? (
0
Recording
• Did you turn the camcorder on and correctly set it to a recording
mode? (
0
40, 56, 102) If you are recording on a memory card, is one
correctly inserted into the camcoder? (
0
35)
Playback
• Did you turn the camcorder on and correctly set it to playback mode?
(
0
48, 98) If you are playing back recordings from a memory card, is
one correctly inserted into the camcorder? (
0
35) Does it contain
any recordings?