Canon LBP1760P, Service Manual

Page: 168 / 394

2. Controller test print
The following items can be printed by selecting and executing a TEST MENU:
• SHOW PAGE COUNT
Displays the total number of pages printed. The total page number is only shown briefly on
the display but does not print. The page count prints in the TEST PRINT.
• TEST PRINT
Make a Test Print. The Test Print lists the printing environment settings and also displays
the graphic and text printing capabilities.
• PRINT PS FONTS
Available only after the Translator Module A5 for Adobe PostScript Level 3 module has been
installed. Prints the PS Font List.
• PRINT PCL FONTS
Prints the PCL Font List.
• PRINT PS DEMO
Available only after the Translator Module A5 for Adobe PostScript Level 3 module has been
installed. Prints the PS demonstration page.
• PRINT PCL DEMO
Prints the PCL demonstration page.
• CONTINUOUS TEST
Make continuous Test Prints.
• CLEANING PAGE
See following page.
Follow these steps to make a Test Print:
1) Press the Go key to set the printer off-line. The On line indicator should be OFF and
PAUSED appears in display.
2) Press the Menu key until you see TEST MENU in the top line.
3) Press the Item key until you see TEST PRINT in the bottom line.
4) Press the Enter key to start printing a Test Print.
5) After the pages are printed, press the Go key to put the printer on-line.
Use the Test Print to verify the operation panel selections, system configurations (memory and
options), and print quality.
4 - 6
CHAPTER 4