manualshive.com logo in svg

Canon LBP1760P, Service Manual

Share
Download
Canon LBP1760P Service Manual Download Page 11

I. FEATURES

1. High speed printing

Equipped with the Intel 960HD-50 processor, this printer is compact in size and capable of
printing a maximum of 17 pages/min. (LTR).

2. Excellent image quality

Resolution of 1200/600DPI, super fine particle toner, and automatic image refinement provide
excellent image.

3. Various paper source in option

The three kinds of optional paper source, paper feeder, envelope feeder, and duplexing unit, will
meet various requirements for a user.
In addition to the standard equipped multi-purpose tray and built-in cassette, installation of the
optional paper feeder and envelope feeder provide a user the four-way paper pick-up sources.
Installation of the duplexing unit enables duplex printing.

4. Memory saving techology

Memory Reduction Technology enables A4/LTR size single-side printing (1200 

×

1200DPI reso-

lution) with only 4MB of memory.

5. Energy saving

Employment of on-demand fixing method and energy saving function that automatically reduces
power consumption when the printer is idle for the specified period of time offers lower power
consumption.

6. Reduction in toner consumption

Toner consumption can be reduced by selecting the economy mode and printing rough image
with lesser toner.

7. Automatic PDL switch

This printer supports the Hewlett-Packard PCL6 printer language.  It can also support the Adobe
PostScript 3 by installing the optional Canon Adobe PostScript 3 Module A5.  It automatically
switches PDL between PCL and PostScript according to the received data.

8. Features of interface

This printer supports automatic interface switch between all active ports.  The printer is
equipped with the IEEE 1284 compliant parallel interface that supports bi-directional commu-
nication between the printer and the computer.  The network board is available as an option,
and the printer is equipped with the I/O slots that allow the printer to be connected to the
Ethernet network and the Token Ring network environments.  As a result, the printer can be
connected to multiple computers simultaneously.

1 - 1

CHAPTER 1

Summary of Contents for LBP1760P











































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands