Canon LASER CLASS 3170, User Manual

Page: 425 / 474

16-22
Summary of Important Settings Chapter 16
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
8.TX REPORT Send a TX report from your fax machine (the relay unit) to the
originator of the transmission.
TRANSMIT Transmits a document relay report to the originator.
NOT TRANSMIT No report is transmitted.
9.TX START TIME Set the fax machine to hold the document from the originator and then
relay it at a specified time. Use 24-hour setting. Up to 5 time settings are
possible.
10.RELAY B’CAST
OFF Turn relay broadcasting off temporarily without canceling or changing
all of the relay box settings.
ON
In order for relay broadcasting to occur, this setting must be on.
2.CHANGE DATA
Change or add the settings on the relay box.
SET RLY GROUP TX# Enter the number of the relay box you want to change.
PASSWORD Enter the password protecting the relay box settings.
You can now change any of the settings listed in the table
above (
1.SETUP FILE ).
3.DELETE FILE Delete a relay box and all settings.
SET RLY TX GROUP#
Enter the number of the relay box you want to delete.
PASSWORD Enter the password of the relay box you want to delete.
3.MEMORY BOX Set up a general memory box to handle ITU-T subaddress
and password transactions. (
➞
8-11)
1.SETUP FILE Create a general memory box and do all the general
memory box settings.
SET BOX # Give the general memory box a box number.
1.FILE NAME Give the memory box a name up to 24 characters long.
2.PASSWORD
Assign a four-digit password to protect the memory box
settings.
3.SUBADDRESS Enter a 20-digit (max.) ITU-T standard subaddress. You
must enter a subaddress in order to use the memory box features.
4.TX PASSWORD Enter a 20-digit (max.) ITU-T password.
5.RX PASSWORD Enter a 20-digit (max.) ITU-T password.