Canon LASER CLASS 3170, User Manual

Page: 301 / 474

12-14
Other Special Features Chapter 12
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Feature Menu Item Description of default
Program button PROGRAM KEY If you press Program before you start a transmission, you
can tell the fax to print an activity report for the transmis-
sion. This button can be programmed for other
functions.(
➞
12-5, 16-6)
Quick-on-line TX QUICK ON-LINE TX When you are scanning documents, the fax will start
dialing and sending before all pages are scanned. You can
turn this feature off. (
➞
16-11)
Receiving password RX PASSWORD No receiving password is set until you set one. If the other
party regularly sends you documents with only an ITU-T
password with no subaddress, set the RX PASSWORD.
(
➞
16-30)
Redialing AUTO REDIAL If the other party’s line is busy, the fax is set to perform
two re-dialing attempts at two minute intervals. You can
increase the number of re-dial attempts and the length of
the interval between attempts. (
➞
6-19, 16-11)
Reduction of
document image
RX REDUCTION
All documents are automatically reduced to fit on a sheet
of paper. You can also set the reduction rate to a fixed rate.
You can select one of the fixed rates to increase the amount
of reduction, or you can turn reduction off. (
➞
16-17)
Report: Activity
Management Report ACTIVITY REPORT An Activity Management Report prints after every 40
transactions. Transactions are listed in chronological order.
You can turn this feature off or set the fax to print an
Activity Management Report at the same time every day.
You can also change the format of the report by listing
sending and receiving transactions separately. (
➞
16-9)
Report: Confidential
receiving CONFID. RX
REPORT A report prints every time you receive a document in a
confidential mailbox. You can turn this feature off. (
➞
16-8)
Report: Error TX REPORT
REPORT WITH TX
IMAGE If an error occurs while you are sending a document, an
Error TX report prints automatically. (
➞
16-8)
Report: Memory box
receiving MEMORY BOX
REPORT
Report: Paper
supply for printed
reports PRT REPORT
WHERE The default setting is off (no paper cassette selected). You
can select a paper supply from Paper Cassette 1 or 2, or
the MP tray. (Paper Cassette 2 is optional for the LASER
CLASS
®
3170/3170MS.) (
➞
16-9)
A report prints every time you receive a document in a
memory box. This feature can be turned off. (
➞
16-8)