Canon IXUS 500 HS User Manual Download Page 148

Page: 148 / 253

Image Categories

149

Finish the setup process.

Press the

button. A confirmation

message is displayed.

Press the

buttons to choose [OK], and

then press the

button.

You can organize images into categories. Note that images are automatically
categorized at the time of shooting, according to shooting conditions.

:Images with detected faces, or images shot in

mode.

:Images detected as

, or

mode, or images shot in

mode.

:Images shot in

, or

mode.

Choose a category.

Press the

button, and then choose

;

the menu (p. 39).

Choose images.

Press the

buttons to choose an image,

press the

buttons to choose a category,

and then press the

button.

displayed.

To cancel selection, press the

button

again.

is no longer displayed.

Repeat this process to specify other images.

•

Images will not be tagged as favorites if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 3.

•

Favorite images will have a three-star rating (

) when transferred

to computers running Windows 7 or Windows Vista. (Does not apply to movies.)

Organizing Images by Category (My Category)

Summary of Contents for IXUS 500 HS






























































































































































































































































Search results

Summary of Contents for IXUS 500 HS

Reviews:

Brands by name

Popular brands

Canon IXUS 500 HS, User Manual

Search results

Summary of Contents for IXUS 500 HS

Reviews:

Brands by name

Popular brands