Canon IXUS 500 HS User Manual Download Page 115

Page: 115 / 253

Shooting Range and Focusing

116

Shoot after choosing a subject to focus on as follows.

Choose [Tracking AF].

Follow the steps in “Changing the AF Frame
Mode” (p. 115) to choose [Tracking AF].

is displayed in the center of the screen.

Choose a subject to focus on.

Aim the camera so that

is on the desired

subject, and then press the

button.

When the subject is detected, the camera beeps
and

is displayed. Even if the subject moves,

the camera will continue to track the subject
within a certain range.

If no subject is detected,

is displayed.

To cancel tracking, press the

button again.

Shoot.

Press the shutter button halfway.

changes to a blue

, which follows the

subject as the camera continues to adjust the
focus and exposure (Servo AF) (p. 118).

Press the shutter button all the way down to
shoot.

Even after your shot,

is still displayed and

the camera continues to track the subject.

Choosing Subjects to Focus On (Tracking AF)

Still Images

Summary of Contents for IXUS 500 HS






























































































































































































































































Search results

Summary of Contents for IXUS 500 HS

Reviews:

Brands by name

Popular brands

Canon IXUS 500 HS, User Manual

Search results

Summary of Contents for IXUS 500 HS

Reviews:

Brands by name

Popular brands