manualshive.com logo in svg

Canon IXUS 500 HS, User Manual

Share
Download
Canon IXUS 500 HS User Manual Download Page 126

Viewing

127

Play movies.

z

To start playback, press the 

m

 button, press 

the 

op

 buttons to choose 

, and then 

press the 

m

 button again.

Adjust the volume.

z

Press the 

op

 buttons to adjust the volume.

Pause playback.

z

To pause playback, press the 

m

 button. The 

movie control panel is displayed. To resume 
playback, press the 

qr

 buttons to choose 

, and then press the 

m

 button.

X

After the movie is finished, 

 is displayed.

If you switch the camera to simple information display mode (p. 128), the names 
of up to five detected people registered in Face ID (p. 59) will be displayed.

Switch to simple information 
display mode and check.

z

Press the 

p

 button repeatedly until simple 

information display is activated, and then 
press the 

qr

 buttons to choose an image.

X

Names will be displayed on detected people.

•

To switch to Shooting mode from Playback mode, press  he shutter button halfway.

•

To deactivate Scroll Display, press the 

n

 button, choose [Scroll Display] 

on the 

1

 tab, and then choose [Off].

•

For playback from the last image viewed, press the 

n

 button, choose 

[Resume] on the 

1

 tab, and then [Last seen].

•

To change the transi ion shown between images, press  he 

n

 button, choose 

[Transi ion] on the 

1

 tab, and  hen press the 

qr

 buttons to choose the effect.

Checking People Detected in Face ID

Still Images

•

If you do not want names to display on images shot using Face ID, press the 

n

 button, choose [Face ID Info] on the 

1

 tab, and then set [Name Display] 

to [Off].

Summary of Contents for IXUS 500 HS






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands