Canon iX7000 Series, Service Manual

Page: 20 / 56

- Logic board
12 times AP position error [6A00] An error occurred in the AP
motor (on the right side of the
ASF unit).
(1) Foreign material or paper debris
around the ASF unit:
remove foreign material.
(2) Cable connection
(3) Part replacement:
- ASF unit
- Logic board
13 times PF position error [6B00] An error occurred in the PF
motor (paper feeding from the
cassette).
RR position error [B310] An error occurred in the RR
(reactor roller) motor.
14 times PF cam sensor
error [6B10] An error occurred during
paper feeding from the
cassette.
(1) Cable connection
(2) Part replacement:
- ASF unit
- Logic board
16 times Pump roller
sensor error [5C20] The pump roller position is
not detected.
(1) Cable connection
(2) Part replacement:
- Purge unit
17 times Paper eject
encoder error [6010] An error occurred in the
paper eject encoder signal.
(1) Smearing or scratches on the EJ
slit disk film:
clean the EJ slit disk film.
(2) Foreign material or paper debris in
the paper path:
remove foreign material.
(3) Cable connection
(4) Part replacement:
- EJ slit disk film
- LF / EJ timing sensor unit
- Platen unit
- Logic board
- Paper feed motor
19 times Ink tank position
sensor error [6502] None of the ink tank position
is detected.
(1) Ink tank position:
confirm the ink tank position.
(2) Re-set or replacement of ink tanks
(3) Cable connection
(4) Part replacement:
- Spur base unit
- Logic board
20 times Other errors [6500] An unidentified error or a
network error occurred.
(1) Part replacement:
- Logic board
Before replacement of the logic board ass'y, check the ink absorber counter value (by
service test print or EEPROM information print). If the counter value is 7% or more, also
replace the ink absorber kit when replacing the logic board ass'y. If the counter value is
less than 7%, register the current ink absorber counter value to the replaced new logic
board instead. [See
4-4. Special Notes on Servicing, (4) Ink absorber counter setting , for
details.]
17 / 53