manualshive.com logo in svg

Canon iR6570 series, Manual

Share
Download
Canon iR6570 series Manual Download Page 76

Various Mail Box Functions

2-4

2

Introduc

tion

 to the M

a

il 

Bo

x Functions

IMPORTANT

 

•

You can use the Memory RX Inbox and Confidential Fax Inboxes storing I-fax documents only if the 
Universal Send Kit is activated.

•

No more documents can be stored in inboxes if any of the following is true: (The numbers below may 
vary depending on the remaining capacity of the hard disk.)
- When 2,000 documents have been stored in the selected inbox.
- When a total of 2,000 documents have been stored in all of the inboxes.
- When a total of about 8,000 pages of documents have been stored in all of the inboxes.

NOTE

 

It is recommended that you delete unnecessary documents or image data from your inbox to make 
space for storing new documents.

Inbox Selection Screen

The screen on the left, which appears when you select [Mail 
Box], is called the Inbox Selection screen.
There are three types of inboxes: User Inboxes, the Memory RX 
Inbox, and Confidential Fax Inboxes. An Inbox Selection screen 
is available for each type of inbox.
Inbox numbers, names, and available memory are displayed for 
each inbox. In addition, an icon appears on the key of each 
inbox to indicate its status.

 is the icon for an empty inbox.
 is the icon for an inbox with documents.

 is the icon for an inbox that is set with a password.

User Inbox

User Inbox

Scanned documents and documents sent from computers are 
stored in User Inbox. The stored documents (data) can be 
printed at anytime with your desired settings. For example, you 
can merge the scanned documents and the documents sent 
from computer, then print and staple them together. They can 
also be sent to computers or by I-Fax at anytime using the 
desired settings. 

Memory RX Inbox

Memory RX Inbox

Received I-Fax documents in the memory of iR6570/iR5570 are 
stored in Memory RX Inbox. The stored documents can be 
printed or sent to computers at anytime using the desired 
settings.

iR6570_CMB_Upgrade_ENG_Post_Final.book  Page 4  Tuesday, May 24, 2005  12:12 PM

Summary of Contents for iR6570 series





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands