Canon iR6570 series Manual Download Page 171

Page: 171 / 508

Changing the Copy (Zoom) Ratio

3-21

Basic

ing

and

il Bo

atu

res

Press .

Copying starts.

NOTE

•

To return the copy (zoom) ratio to 100%, press [1:1].

•

To cancel this setting, press [Copy Ratio]

➞

[Zoom Program]

➞

[Cancel].

•

To cancel all settings and return the machine to the Standard mode, press

■

Mail Box

Follow the procedure below to specify an inbox.

❑

Select the desired User Inbox number to display the Document Selection screen.

❑

Press [Scan].

If necessary, see the screen shots in steps 1 to 6 of "Storing Originals into an Inbox,"
on p. 2-13.

The Scan screen is displayed.

Specify the Zoom Programme (Zoom) mode and scan originals in
accordance with "Copying," on p. 3-19.

For the Mail Box function, enter the Original Size and Record Size.

NOTE

•

To cancel this setting, press [Copy Ratio]

➞

[Zoom Program]

➞

[Cancel].

•

To cancel all settings and return the machine to the Standard Scan mode, press [Initial Settings].
To return to the Inbox Selection screen, press

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 21 Tuesday, May 24, 2005 12:12 PM

Summary of Contents for iR6570 series





























































































































































































































































































































































































































































































































Search results

Summary of Contents for iR6570 series

Reviews:

Brands by name

Popular brands

Canon iR6570 series, Manual

Search results

Summary of Contents for iR6570 series

Reviews:

Brands by name

Popular brands