3-6
Setting Image Orientation Priority
Setting/Storing
Spec
if
ications
of
the
Co
py
Function
3
Setting Image Orientation Priority
The orientation of the image may be printed conversely depending on the copy mode set.
With this function, you can set whether to copy the image in the same direction as the original.
IMPORTANT
• This setting is not available when the Finisher-J1 is attached.
NOTE
• When the Image Orientation Priority is set to ‘On,’ the copies will take longer to process than normal.
• The default setting is ‘Off.’
1
Call up the desired screen as follows:
➔
[Copy Settings]
➔
[Image Orientation Priority]
2
Select [On] or [Off], and press [OK].
The specified mode is set.
3
Press [Done] repeatedly until the Basic Features screen appears.
