2-5
Adding Front and Back Covers, Sheet Insertions, and Chapter Pages to Copy Sets (Cover/Sheet Insertion)
Add
itional Copy
Fun
c
ti
o
n
s
2
Adding Front and Back Covers, Sheet
Insertions, and Chapter Pages to Copy Sets
(Cover/Sheet Insertion)
This function enables you to programme the machine to automatically add front and back
covers, sheet insertions, or chapter pages using a different type of paper stock from what is
used for the main text. In addition, you may also copy on the front and back covers and the
sheet insertions.
IMPORTANT
• When the machine is operating in the Cover/Sheet Insertion mode, you cannot use the Group, Offset Group,
Rotate Collating, Rotate Grouping, Saddle Stitch, Book
2-Sided, Two-Page Separation, Image Combination,
Image Separation, Booklet, Transparency Interleaving, Image Repeat, Mirror Image, and Form Composition
modes.
• If you use Different Size Originals with Auto Paper Selection, you cannot select the Cover/Sheet Insertion mode.
• If you use Cover/Sheet Insertion with the remote or cascade copy mode, Auto Orientation is not performed.
• When the Finisher-J1 (optional) is attached, you cannot staple more than 30 sheets (A4 and A4R), or 15 sheets
(A3) of output paper, including sheet insertions.
• When the Saddle Finisher-G1 (optional) is attached, you cannot staple more than 50 sheets (A4 and A4R),
or 25 sheets (A3) of output paper, including sheet insertions.
NOTE
• When copying on the front cover, back cover, or sheet insertions, these sheets are included in the count of the
total number of copies. If these sheets remain blank, however, they are not included in the count of the total
number of copies.
• Chapter pages are included in the count of the total number of copies.
