2-52
Copying Separately-Set Originals (Job Build)
Add
itional Copy
Fun
c
ti
o
n
s
2
Copying Separately-Set Originals
(Job Build)
This mode enables you to scan originals that are too many to be set at once by dividing
them into multiple batches. You can use both the feeder and the platen glass for scanning.
The originals are copied as one document, after all the batches have been scanned.
IMPORTANT
• The only copy settings that can be changed while scanning originals in the Job Build mode are the numbers of
copies, 2-Sided Original, original type, and copy exposure. All other settings must be set beforehand, according to
the type, of original or the desired copy mode.
• If you place the originals in the feeder, remove each original from the original output area when scanning is complete.
NOTE
• If you place differently sized originals in the feeder, set the Different Size Originals mode.
• If you want to copy one-sided originals as two-sided copies, and if the first batch is one-sided, set the 1
2-Sided
mode before scanning. If the first batch is two-sided, set the 2
2-Sided mode before scanning. To scan the next
batch of originals, set or cancel the 2-Sided Original mode according to the type of original.
• It is useful to store originals in an inbox and print them with the Merge Documents mode when you cannot prepare
originals at one time, or when you want to set different settings for each original. (See Chapter 4, “Using/Arranging
Documents Stored in an Inbox,” in the Mail Box Guide.)
Originals
Copies
