Canon iR2018 Series, Portable Manual, Page: 70 / 122

Chapter 5
58
5.1.17.3 Test Mode Menu List (Touch Panel Type)
0017-6195
iR2022i / iR2018i
Test mode menu list
To invoke test mode, follow these steps:
1) Enter service mode.
Sequentially press the Additional functions key, 2 key, 8 key, and Additional functions key on the operation panel.
2) Press the arrow key on the touch panel to display "TEST MODE".
3) Press [OK].
T-5-33
(1) FUNCTION TEST G3 4800bps G3 4800 bps signal transmission test
(3) 6-3 SENSOR [1] - [6] Sensor checks
(1) SENSOR CHECK 0:NORMAL 1:LATCH
(0) SENSOR NORMAL [0] - [2]
(0) CAS 0 REG 0 DEL 0 MULTI 0
(1) TONER 0 FULL 0 2ND-DEL 0000
(2) OP1 0000 OP2 0000 OP3 0000 PATH
0000
(1) SENSOR
LATCH [0] -
[2]
(0) CAS 0 REG 0 DEL 0 MULTI 0
(1) TONER 0 FULL 0 2ND-DEL 0000
(2) OP1 0000 OP2 0000 OP3 0000 PATH
0000
(2) SWITCH CHECK [0] - [1]
(0) CAS 0000 LOCK 0000
(1) OP1 0000 OP2 0000 OP3 0000
(3) DS ON DES of HPS ON BCVS of
(4) REF xxx ANT xxx |ANT-REF| xxx
(5) BSCT on BDAC[ A3] BDSS3-0 [ of of of of ]
(6) NCR Sts: NCR xxxxx DPT MGN OK RDY 0101
(7) LAST of EXIT of REG of CVR of
(8) WID1 on WID2 on LEN1 on LEN2 on
(9) D+Temp xxxx E+Hum xxxx F+Temp xxxx xxxx
(4) ADF FEED TEST ADF delivery operation test
(5) BOOK FEED TEST Book copy operation test
(6) 6-6 SPEAKER FREQ:[1] VOL:[2] Speaker volume and buzzer frequency test
(7) Not used
(8) FUNCTION TEST LAMP TEST ALL Lamp test
(9) LINE TEST [1] - [3] Line signal reception test
(0) ROLLER CLEAN 0:PRT 1:ADF Printer and ADF roller cleaning
(0) PRT ROL CLEAN Press start key
(1) ADF ROL CLEAN Press start key
Numerals enclosed in parentheses denote a numeric keypad key to be pressed each.
Group Subgroup Item 1 Item 2 Item 3 Explanation
TEST MODE [1] - [9], [#]
(1) DRAM [1] - [2] D-RAM data check
(1) D-RAM TEST Write/read check
(2) D-RAM TEST Read check
(2) SCAN TEST [1] - [8]
(1) SHADING Automatic gain adjustment
(3) SHEET POS ADJ CS position adjustment
(4) TRASH DETECT Dust detection
(5), (6), (9), (*) Not used
(3) PRINT TEST [1] - [9]
(1) Not used
(2) All-black output
(3) Not used
(4) Back belt output
(5), (6), (7), (8), (9), (*) Not used
(4) MODEM TEST [1] - [9]
Numerals enclosed in parentheses denote a numeric keypad key to be pressed each.
Group Subgroup Item 1 Item 2 Item 3 Explanation