Canon iR2018 Series, Portable Manual, Page: 45 / 122

Chapter 5
33
5.1.4 Scanner Function Settings (SCANNER)
5.1.4.1 Setting of Bit Switch
0017-6116
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
<SCAN SW SSSW01>
T-5-19
Specify whether to output an image for ADF perpendicularity adjustment.
5.1.4.2 Numeric Parameter Functional configuration
0017-6117
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Not used - -
3 Not used - -
4 Outputting an Image for ADF Perpendicularity
Adjsutment output not output
5 Not used - -
6 Not used - -
7 Not used - -
No. Function Default Setting range Unit
001: - 023: Not used
024: CIS scan position during ADF scanning. 385 300-450 one unit=0.1mm
025: Not used
026: Distance from the standby position of CIS to the
shading start point. 22 6-48 one unit=0.1mm
027: - 030: Not used
031: Vertical scan start position adjustment 35 0-70 one unit=0.1mm
032: Horizontal scan start position adjustment 115 50-150 one unit=0.1mm
033: Vertical scan magnification correction 16 0-32 one unit=0.1%
034: Not used
035: - 036: Reader motor speed adjustment 474
037: - 040: Not used
041: Vertical scan start position adjustment (scanning
on ADF) 35 0-70 one unit=0.1mm
042: Horizontal scan start position adjustment
(scanning on ADF) 220 170-270 one unit=0.1mm
043: Horizontal scan end position correction
(copy:scanning on ADF) 24 0-200 one unit=0.1mm
044: Horizontal scan end position correction
(superfine:scanning on ADF) 36 0-200 one unit=0.1mm
045: Horizontal scan end position correction
(fine:scanning on ADF) 47 0-200 one unit=0.1mm