Canon iR2018 Series, Portable Manual, Page: 32 / 122

Chapter 5
20
5.1.1.3.2 Detailed Discussions of Bit 7
0017-6056
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to enable/disable transmission of a 1080-Hz tonal signal before transmission of the CED signal.
Select 'transmit' if errors occur frequently because of an echo when reception is from overseas.
Memo:
Any of the following error code may be indicated because of an echo at time of reception
##0005, ##0101, ##0106, ##0107, ##0114, ##0200, ##0201, ##0790
5.1.1.4 SSSW-SW04
5.1.1.4.1 List of Functions
0017-6057
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
T-5-3
5.1.1.4.2 Detailed Discussions of Bit 2
0017-6058
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to select the number of last flag sequences for a protocol signal (transmission speed at 300 bps). Select '2' if the other party fails to receive the protocol signal
properly.
Memo:
Any of the following error codes may be indicated at time of transmission
##0100, ##0280, ##0281, ##0750, ##0753, ##0754, ##0755, ##0758, ##0759, ##0760, ##0763 ##0764, ##0765, ##0768, ##0769,##0770, ##0773, ##0775, ##0778,
##0780, ##0783, ##0785, ##0788
5.1.1.4.3 Detailed Discussions of Bit 3
0017-6059
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Use it to select an appropriate reception mode after transmission of the CFR signal.
If errors occur frequently at time of reception because of the condition of the line, select 'high speed' for reception mode and, at the same time, selects 'do not receive'
for 'ECM reception.'
Memo:
Any of the following error codes may be indicated at time of reception because of line condition
##0107, ##0114, ##0201
Be sure to change bit 4 before changing this bit; if errors still occur, change this bit.
When 'high speed' is selected, only high-speed signals (images) will be received after transmission of the CFR signal.
2 not used - -
3 not used - -
4 not used - -
5 not used - -
6 not used - -
7 tonal signal before CED signal transmission transmit do not transmit
Bit Function 1 0
0 not used - -
1 not used - -
2 the number of final flag sequences of protocol signals 2 1
3 Reception mode after CFR signal transmission high speed high speed/low speed
4 the length of the period of ignoring low speed signals after
CFR output 1500 ms 700 ms
5 CI signal frequency check at the time of PBI setting Check Not
6 CNG signal for manual transmission Not transmitted Transmitted
7 CED signal for manual reception Not transmitted Transmitted
Bit Function 1 0