Canon iR2018 Series, Portable Manual, Page: 54 / 122

Chapter 5
42
5.1.5.2.17 <056: Margin adjustment at the left edge of the copy>
0017-6171
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Adjust the margin at the left edge of the copy. Increasing the value makes the margin at the left edge larger.
5.1.5.2.18 <058:: Adjustment of the registration loop volume (Manual feed tray)>
0017-8644
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
If there is a registration loop noise and abrasion while feeding the paper from the manual feed tray, registration loop noise and abrasion could be reduced by adjusting
the volume of the registration loop. By making the value larger, loop volume will become bigger.
5.1.5.2.19 <059:Adjustment of the registration loop volume. (Cassette)>
0017-8645
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
If there is a registration loop noise and abrasion while feeding the paper from the cassette, registration loop noise and abrasion could be reduced by adjusting the
volume of the registration loop. By making the value larger, loop volume will become bigger.
5.1.5.2.20 <060:Adjustment of the registration loop volume (Option cassette)>
0017-8646
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
If there is a registration loop noise and abrasion while feeding the paper from the option cassette, registration loop noise and abrasion could be reduced by adjusting
the volume of the registration loop. By making the value larger, loop volume will become bigger.
5.1.5.2.21 <061:Adjustment of the registration loop volume. (Duplex unit)>
0017-8648
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
If there is a registration loop noise and abrasion while feeding the paper from the duplex unit, registration loop noise and abrasion could be reduced by adjusting
the volume of the registration loop. By making the value larger, loop volume will become bigger.
5.1.5.2.22 <062:Temperature adjustment UP/DOWN mode. (For plain paper)>
0017-8649
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
For plain paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.
For plain paper relation : Normal, Normal Lo, rough paper Lo, thin post card, and OHP mode.
0 to 6: -35 to -5 deg C (1unit=5deg C)
7: 0 deg C
8 to 14: +5 to +35 deg C (1unit=5deg C)
5.1.5.2.23 <063:Temperature adjustment UP/DOWN mode. (For rough paper)>
0017-8650
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
For rough paper relation, the volume of the temperature adjustment offset could be changed by 5 deg C at a time to aim the fixed temperature.
For rough paper relation: rough paper, super rough paper, super rough paper H, post card, post card H, and envelope mode.
0 to 6: -35 to -5 deg C (1unit=5deg C)
7: 0 deg C
8 to 14: +5 to +35 deg C (1unit=5deg C)
5.1.5.2.24 <064:Mode for preventing the temperature rise of the end >
0017-8651
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set when the fixed film squeaks. Lower the target fixing temperatue and extend sheet-to-sheet time except A4/A3/11X17/LTR size.
0: Normal
1 to 5: Mode for responding film squeak. (reference to the table below)
T-5-25
5.1.5.2.25 <065:Mode for reducing sand image>
0017-8655
iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i
Set when sand image *1 has occurred on the print image.
Restraining the scatter of the toner by increasing the electric current of the AC electrification; the sand image could be reduced.
Sand image *1: Multiple black dots and white dots appear on half tone. Or multiple black dots appear on white background.
0: Normal.
1 to 3: Reducing mode. (Same operation to set 1 to 3)
Setting Print temperature control Sheet-to-sheet temperature control Sheet-to-sheet time
1 Target temperature-10 deg C Print temperature control -20 deg C 0 sec extension
2 Target temperature-20 deg C Print temperature control -20 deg C 0 sec extension
3 Target temperature-10 deg C Print temperature control -20 deg C 10 sec extension
4 Target temperature-20 deg C Print temperature control -20 deg C 10 sec extension
5 Target temperature-30 deg C Print temperature control -20 deg C 15 sec extension