Canon iR2016 Series, Service Manual

Page: 56 / 406

Chapter 1
1-30
*: Factory default
4. MANAGE USER ID OFF(*), ON
5. NETWORK SETTINGS TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON; DHCP, BOOTP, RARP), IP ADDRESS, SUBNET MASK,
GATEWAY ADDRESS, USE LPD (ON(*); PORT NO., OFF), RAW SETTINGS (ON(*); PORT NO., USE
BIDIRECTIONAL, OFF), USB HTTP (ON(*); PORT NO., OFF), SET IP ADD RANGE (OFF(*), ON), RX MAC
ADD SET. (OFF(*), ON)
SNMP SETTINGS: USE SNMP (ON(*): PORT NO., OFF), COMMUNITY NAME 1, COMMUNITY NAME 2,
SNMP WRITABLE 1 (ON(*), OFF), SNMP WRITABLE 2 (ON, OFF(*))
DEDICATED PORT: ON(*), OFF
ETHERNET DRIVER: DETECT (AUTO(*), MANUAL), DUPLEX (HALF DUPLEX(*), FULL DUPLEX),
ETHERNET TYPE (10 BASE-T(*), 100 BASE-TX), MAC ADDRESS
VIEW IP ADDRESS: IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS
STARTUP TIME SET.: 0(*) to 300 SEC.
6. COMMUNICATIONS TX START SPEED: 2400 to 33600(*) bps
RX START SPEED: 2400 to 33600(*) bps
MEMORY LOCK SETTI: OFF(*), ON (PASSWORD, REPORT PRINT, MEMORY RX TIME)
R-KEY SETTING: PSTN(*), PBX (HOOKING, PREFIX)
7. REMOTE UI ON(*), OFF
8. ACCESS TO DEST. RESTRICT NEW ADD. : OFF(*), ON
FAX DRIVER TX: OFF(*), ON
9. CHECKING THE LOG ON(*), OFF
10. USE DEVICE USB OFF(*), ON
Additional Functions Available Settings