Canon iR2016 Series Service Manual Download Page 311

Page: 311 / 406

Chapter 13

13-9

##0106

[Rx]

at time of reception, the procedural signal is received for 6 sec while in wait for the
signal.

##0107

[Rx]

at time of reception, the transmitting party cannot use fall-back.

##0109

[Tx]

at time of transmission, a signal other than DIS, DTC, FTT, CFR, or CRP is
received, and the procedural signal has been sent more than specified.

##0111

[Tx/Rx]

memory error has occurred.

##0114

[Rx]

at time of reception, RTN is transmitted.

##0200

[Rx]

at time of reception, no image carrier is detected for 5 sec.

##0201

[Tx/Rx]

DCN is received outside the normal parity procedure.

##0220

[Tx/Rx]

system error (main program out of control) has occurred.

##0232

[Tx]

encoding error has occurred.

##0237

[Rx]

decoding error has occurred.

##0261

[Tx/Rx]

system error has occurred.

##0280

[Tx]

at time of transmission, the procedural signal has been transmitted more than
specified.

##0281

[Tx]

at time of transmission, the procedural signal has been transmitted more than
specified.

##0282

[Tx]

at time of transmission, the procedural signal has been transmitted more than
specified.

##0283

[Tx]

at time of transmission, the procedural signal has been transmitted more than
specified.

##0284

[Tx]

at time of transmission, DCN is received after transmission of TCF.

##0285

[Tx]

at time of transmission, DCN is received after transmission of EOP.

##0286

[Tx]

at time of transmission, DCN is received after transmission of EOM.

##0287

[Tx]

at time of transmission DCN is received after transmission of MPS.

##0288

[Tx]

after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.

##0289

[Tx]

after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.

##0290

[Tx]

after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.

##0670

[Tx]

at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected
to be detected, and the CI signal is expected to be transmitted in response; however,
the procedure fails to advance, and the line is released because of T1 time-out.

##0671

[Rx]

at time of V.8 arrival, procedure fails to move to phase 2 after detection of CM
signal from caller, causing T1 time-out and releasing line

##0672

[Tx]

at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and
thereafter stops, causing the machine to release the line and suffer T1 timeout.

##0673

[Rx]

at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter
stops, causing the machine to release the line and suffer T1 timeout.

##0674

[Tx]

at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the
control channel and thereafter stops, causing the machine to release the line and
suffer T1 timeout.

##0675

[Rx]

at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the
control channel and thereafter stops, causing the machine to release the line and
suffer T1 timeout.

##0750

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-NULL, causing the procedural signal to be transmitted more than specified.

##0752

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-NULL.

##0753

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-NULL, or T5 time-out (60 sec) has occurred.

##0754

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-NULL.

##0755

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-MPS, causing the procedural signal to be transmitted more than specified.

##0757

[Tx]

at time of ECM transmission, DCN is received after retransmission of PPS-MPS.

##0758

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.

##0759

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS.

##0760

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOM, causing the procedural signal to be transmitted more than specified.

##0762

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOM.

##0763

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.

##0764

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOM.

##0765

[Tx]

at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOP, causing the procedural signal to be transmitted more than specified.

##0767

[Tx]

at time of ECM transmission, DCN is received after transmission of PPS-EOP.

##0768

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP, or T5 time-out (60 sec) has occurred.

##0769

[Tx]

at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP.

No. Tx/Rx

Description