Canon iR2016 Series, Service Manual

Page: 320 / 406

Chapter 14
14-2
These setting items are for image adjustment in printer assembly and for special mode for the field-related measures.
#NETWORK
Do not use.
#CODEC
Do not use.
#SYSTEM
These are used for the import/export of user information through USB.
#ACC
Register the accessories.
#COUNTER
Use it to check estimates for maintenance/parts replacement.
#LMS
Do not use.
#REPORT
Use it to generate reports on various service data.
#DOWNLOAD
Use it to download firmware to the ROM of a PCB in question.
#CLEAR
Use it to reset various data to initial settings.
#ERROR DISPLAY
An error code is displayed when a service error has occurred.
#ROM
Displays ROM information, such as version numbers and checksums.
#TEST MODE
Makes various status checks, such as contact sensor, sensor and print status.
14.1.3 Using the Mode (iR2020/iR2020J/iR2016/iR2016J)
0011-1721
iR2016J / iR2016 / iR2020 /
F-14-1
14.1.4 Using the Mode (iR2020i/iR2016i)
0012-6182
iR2016i / iR2020i
1) Selecting User Mode
Press the User mode key, 2key, 8key,
User mode key sequentially.
#SSSW
# N U M E R I C P a r a m .
# N U M E R I C P a r a m .
TEXT/PHOTO
2) Selecting a Menu Item
Select the Menu item using the
left/right arrow key.
3) Press the OK key.
5) Registering/Setting Data
Enter data using the keypad,
and press the OK key.
6) Press the Stop key or User
mode key to end service mode.
A U T O
0 1
# N U M E R I C P a r a m .
# 3
NUMER I C P a r am.
0 0 1
0 0 1
0 0 2
0 0 2
0
0
1 0
4) Selecting a Prarameter
Select the Prarameter using the
left/right arrow key.
1) Selecting User Mode
Press the User mode key, 2key, 8key,
User mode key sequentially.
#SSSW
TEXT/PHOTO
3) Selecting a Menu Item
Press the OK key. Or, press
the keypad after pushing # key.
2) Press the OK key.
5) Registering/Setting Data
Enter data using the keypad,
and press the OK key.
6) Press the Stop key or User
mode key to end service mode.
A U T O
0 1
0 3 3
4) Selecting a Bit Switch
Select the bit using the
left/right arrow key.
# S S S W
# S S S W
000000000
000000000
<Operation at the time of Bit SW> <Operation at the time of Parameter>
0 3 3
# S S S W
000000000
0 3 3
# S S S W
000000001