Canon iPF700, Service Manual

Page: 64 / 202

Chapter 2
2-18
Cleaning 3
Initial filling ink
Fills the empty tube (during initial installation) with
ink, and then performs normal cleaning.
Cleaning 4
Ink drainage for head
replacement Drains ink to replace the head (drains only the ink in
the head).
Cleaning 5
Ink drainage for secondary
transport Drains ink from the head and tube for secondary
transport.
Cleaning 6
Normal (strong) cleaning
Performs suction stronger than when adjusting the ink
filling amount in the head or normal cleaning to unclog
nozzles.
Cleaning 7
Aging Performs idle ejection after replacement of the head.
Cleaning 8
Flushing
Performs idle ejection to remove burnt deposits on the
surface of the head heater.
Cleaning 10
Ink filling after secondary
transport
Fills the empty tube (during installation after
secondary transport) with ink, and performs normal
cleaning.
Cleaning 15
Dot count suction
Performs suction to remove ink adhered to dried
nozzles and thick ink accumulated on the face when
the dot count reaches the prescribed value.
Cleaning 16
Precipitated ink agitation
Performs the agitation (ink supply valve open/close)
operation to prevent the ink ingredient from
precipitating.
Cleaning 17
Cleaning (weak)
Performs cleaning weaker than normal cleaning to
unclog nozzles.
Cleaning
mode
Name Description of cleaning