Canon imageRUNNER ADVANCE 8105, Getting Started

Page: 42 / 256

Installation Location and Handling
1-4
1
Before You Start Using This Machine
Avoid locations that are subject to vibration .
For example, avoid installing the machine on unstable floors or stands.
Avoid exposing the machine to rapid changes in temperature .
If the room in which the machine is installed is cold but rapidly heated, water droplets (condensation) may form inside the machine. This may
result in a noticeable degradation in the quality of the copied image, the inability to properly scan an original, or the copies having no printed
image at all.
Avoid installing the machine near computers or other precision electronic equipment .
Electrical interference and vibrations generated by the machine during printing can adversely affect the operation of such equipment.
Avoid installing the machine near televisions, radios, or similar electronic equipment .
The machine might interfere with sound and picture signal reception. Insert the power plug into a dedicated power outlet, and maintain as
much space as possible between the machine and other electronic equipment.
Do not remove the machine's leveling feet .
Do not remove the machine's leveling feet after the machine has been installed. If you put weight on the front of the machine while the
drawers, paper decks, or units within the machine are pulled out, the machine may fall forward. To prevent this from happening, make sure
that the machine's leveling feet are in place.
■
■
■
■
■